|
FP-F10 ZK WIEGAND FINGER
PRINT READER
FP-F10 is a fingerprint reader
produced by ZK Software specifically for the Access Control. Its
remarkable advantage is that it can match with most of the access
controllers on the market, inland or abroad. It supports Wiegand
26-64 output, and integrates special access control software which
can be upload, download, delete and Wiegand products, all
input/output are using anti-jamming protection and
over-voltage/circuit protection. The product experiences the strict
degradation test before leaving factory, high stability the main
feature.
Features
 Support
Wiegand 26 or user-defined format, match most of door access
controller
External
connected with IC/ID reader. Card + Fingerprint validation mode for
current
reader
Adopt
Biokey 2005 latest algorithm and intel32 bits processor
Option
for built in Mifare or EM reader, it can deal with 3000 fingerprint
templates, no
matter good or poor quality, within only 1 second.
Adopt
solid, durable, anti-static optical sensor
User-defined
ID No, easy to manage
Standard
RS485 connection, RS 232 or TCP/IP as auxiliary communication port
Support
u are u sensor or FP-F10 for collecting fingerprint template
Stability
protection: reset switch, hardware watchdog, communication setting
initialization
by hardware, anti-over voltage and over current protection.
Dismantle
alarm TTL output
Convenient
DB15 connection
Applicable
Wiegand manage software for fingerprint enrollment, download,
upload,
deletion
Specifications
|
Terms
|
Content
|
|
Wiegand input and
output |
provide a standard
wiegand26 or user-defined format to controller, accept the
wiegand26 input, that is, a ID card reader could connect
toit directly |
|
Capacity of the
templates |
Standard version |
600 templates |
|
The version With
in-built ID module |
600/5000/8000
templates (three options) |
|
The version with
in-build Mifare module |
Infinite capacity |
|
Verification mode
|
Standard version |
1：1 or 1：N,
support only fingerprint |
|
The version with
ID card |
When 600
templates, 1：1or 1：N, support only fingerprint, card +
fingerprint, only card |
|
The version with
ID card |
When 5000/8000
templates, 1：1, support card + fingerprint |
|
Communication ways |
TCP/IP as backup
|
Default IP
address：192.168.1.201 |
|
RS-485
|
Default baud
rate：38400, device number：1, port：COM1 |
|
Sensor |
Type |
Optical
|
|
Resolution
|
500DPI
|
|
Display |
Indication
|
Power indicator,
dual-color LED |
|
Identification |
Speed |
speed＜2 sec
|
|
Technical spec |
FAR≤0.0001%,
FFR≤1% |
|
Alarm |
Dismantle alarm
|
TTL (transistor-transistor
logic) output for alarm |
|
Configuration |
Intel32bit
processor, 2005 version algorithm |
|
Power |
12V DC, currency
under idle status＜50mA, wording currency＜400mA |
|
Operation
environment |
Temperature
|
0℃-45℃
|
|
Humidity
|
20%-80%
|
|
Software |
Management
software of fingerprint reader |
|
Size |
130×58×62mm
|
(Designs and specifications are subject
to change without notice.)
|
