 |
「CN-M01
- CNEX Pan, Tilt & Zoom Matrix Keyboard」
The keyboard allows operate 1 to 32 speed dome camera or decoder via
RS485 to control camera's pan, tilt, zoom, focus, iris, auto pan and
receiver present position. |
 |
「CN-M02
- CNEX Pan, Tilt & Zoom Matrix Keyboard」
The keyboard allows operate 1 to 32 speed dome camera or decoder via
RS485 to control camera's pan, tilt, zoom, focus, iris, auto pan and
receiver present position. |
 |
「SN-306 - CNEX
Single Channel Pan Controller AC220V」
Specially reduced version to operate scanners which only supports
pan movements. This model enables control over scanners running at
AC 220V. |
|
|
「SN-306A
- CNEX Single Channel Pan Controller AC24V」
Specially reduced version to operate scanners which only supports
pan movements. This model enables control over scanners running at
AC 24V.
|
 |
「SN-501
- CNEX Single Channel Pan & Tilt Controller AC220V」
This unit is design to control a single compatible pan & tilt
scanner. This controller enable pan & tilt control
over scanners which runs on AC 220V. |
|
|
「SN-501A - CNEX
Single Channel Pan & Tilt Controller AC24V」
This unit is design to control a single compatible pan & tilt
scanner. This controller enable pan & tilt control
over scanners which runs on AC 24V. |
 |
「SN-505 - CNEX 5
Channel Pan & Tilt Controller AC220V」
This unit enables controlling up to 5 unit pan & tilt scanners
enabling multiple control centralized in one unit instead of wasting
space for a single controller for each scanner. This model running
at AC 220V. |
|
|
「SN-505A - CNEX
5 Channel Pan & Tilt Controller AC24V」
This unit enables controlling up to 5 unit pan & tilt scanners
enabling multiple control centralized in one unit instead of wasting
space for a single controller for each scanner. This model running
at AC 24V. |
 |
「SN-301 - CNEX
Single Channel PTZ Controller AC220V」
This unit controls a single channel pan, tilt and zoom enabled
camera. Suitable for pan and tilt scanner using AC 220V to operate. |
|
|
「SN-301A - CNEX
Single Channel PTZ Controller AC24V」
This unit controls a single channel pan, tilt and zoom enabled
camera. Suitable for pan and tilt scanner using AC 24V to operate. |
 |
「SN-308 - CNEX 5
Channel PTZ Controller AC220V」
This controller allows control over multiple pan, tilt and zoom
enabled cameras. Similar to its cousin it is intuitive to use and
very space saving. Suitable for pan and tilt scanner using AC 220V
to operate. |
|
|
「SN-308A - CNEX
5 Channel PTZ Controller AC24V」
This controller allows control over multiple pan, tilt and zoom
enabled cameras. Similar to its cousin it is intuitive to use and
very space saving. Suitable for pan and tilt scanner using AC 24V to
operate. |
 |
「78301
- CNEX Remote Controller for 220X Zoom Camera」
Remote controller for 78300/AP-250 zoom camera. Enable zoom, focus
function and supply power for 78300/AP-250 camera. |
|
|
|
